Yamaha XTZ 660 Tenere
The Yamaha XTZ 660 Tenere appeared in 1991, replacing the outdated Yamaha XT600Z Tenere. The motorcycle was focused primarily on the European market, so the Yamaha XTZ660 Tenere is practically not found in Japan. In 1994, the motorcycle undergoes a slight restyling, getting similarities (plastic design, dashboard) with the older version Yamaha XTZ750 Super Tenere. And in 1996 the model was discontinued (official sales of new motorcycles continued until 1999 inclusive).
The Yamaha XTZ 660 Tenere was based on a 1-cylinder liquid-cooled engine with a volume of 660 cc. see, delivering 48 hp. power and 57 Nm of torque. Restyled versions produced up to 46 hp. and 56 Nm, which was due to small changes under the new environmental emission standards. Of the features of the motor, the head of the block with 5 valves and the lubrication system with a dry sump (oil in the frame) should be distinguished.
Other features of the Yamaha XTZ660 Tenere include a steel frame, advanced long-travel suspension in the form of a 43 mm telescopic fork and adjustable (preload + rebound) monoshock, front and rear disc brakes, a 20 liter fuel tank and only 195 kg of curb weight.
Despite the decent technical characteristics and the generally low price, the model was not widely used. At a certain stage, the motorcycle showed good demand (4500 units were sold in Germany alone), due to the then successful performance of Yamaha riders in the Dakar Rally. However, after restyling, the Yamaha XTZ660 Tenere was practically not sold, which forced Yamaha to suspend production in 1995 and resume it only in 1996, which did not change the situation and became the last year of the official life of the model on the production conveyor.
In 1995, a sports model was created on the basis of the Yamaha XTZ 660 Tenere engine - Yamaha SZR 660.
The main competitors of the Yamaha XTZ 660 Tenere in the class:
Photos
Specifications
Specifications Yamaha XTZ 660 Tenere:
| Model | Yamaha XTZ 660 Tenere |
|---|---|
| Motorcycle type | tourist enduro |
| Release year | 1991-1996 |
| Frame | steel space |
| Engine type | 1-cylinder, 4-stroke |
| Working volume | 660 cc cm. |
| Bore / stroke | 100.0 x 84.0 mm |
| Compression ratio | 9.2: 1 |
| Cooling | liquid |
| Number of valves per cylinder | SOHC 5 valves |
| Fuel supply system | carburetor, 1x Teikei Y26PV |
| Ignition type | digital TCI |
| Maximum power | 48.0 h.p. (35.3 kW) @ 6250 rpm - XTZ660 Tenere (3YF, 4BW)
46.0 h.p. (33.8 kW) @ 6250 rpm - XTZ660 Tenere (4MY, 4NW, 4NV) |
| Maximum torque | 57.0 Nm (5.8 kg-m) @ 5250 rpm - XTZ660 Tenere (3YF, 4BW)
56.0 Nm (5.7 kg-m) @ 5250 rpm - XTZ660 Tenere (4MY, 4NW, 4NV) |
| Gearbox | 5-speed |
| Drive type | chain |
| Front tire size | 90 / 90-21 (54S) |
| Rear tire size | 120 / 90-17 (64S) |
| Front brakes | 1 disc, 282 mm, 2-piston caliper |
| Rear brakes | 1 disc, 220 mm, 1-piston caliper |
| Front suspension | 43mm telescopic fork, 220mm travel |
| Rear suspension | linkage with monoshock (adjustable preload and rebound damping), stroke - 200 mm |
| Motorcycle length | 2265 mm |
| Motorcycle width | 885mm - XTZ660 Tenere (3YF, 4BW)
845 mm - XTZ660 Tenere (4MY, 4NW, 4NV) |
| Motorcycle height | 1355mm - XTZ660 Tenere (3YF, 4BW)
1385 mm - XTZ660 Tenere (4MY, 4NW, 4NV) |
| Wheelbase | 1495 mm |
| Saddle height | 865 mm |
| Minimum ground clearance | 245 mm |
| Acceleration to 100 km / h | 6.0 sec |
| Maximum speed | 167 km / h |
| Fuel tank capacity | 20.0 l (including reserve - 3.5 l) |
| Motorcycle weight (curb) | 195 kg - XTZ660 Tenere (3YF, 4BW)
197 kg - XTZ660 Tenere (4MY, 4NW, 4NV) |
Documentation